NEW DEVELOPMENT 2021 | #18 CUPRA Ateca Facelift
- 21 Oct 2021
Car and engine specification:
for CUPRA Ateca Facelift, 4Drive, Type 5FP, 2021--> =>
2.0L TSI 221kW (DNF, with GPF)
REMUS GPF-BACK-SYSTEM
- 100% stainless steel
- Powerful sound
- Performance and torque increase
- Light weight construction
- Made in Austria
INFOBOX:
- GPF-Back-System L/R Quad:790021 1500 + tail pipe set! No vehicle modifications required!
When fitting REMUS sports silencers, cat-back systems and cat replacement pipes designed for use on closed tracks, it is advantageous to carry out an ECU remapping, in order to exploit the optimum performance of the exhaust system and to prevent the check engine from lighting up.
| Part Nr. | Description |
| 790021 1500 |
GPF-back-system consisting of sport exhaust centered (absorption principle) for L/R system quad flow original tube Ø 70 mm - REMUS tube Ø 76 mm with 2 integrated valves incl. GPF-back front section replacement tube, incl. connection tube with spherical connection for mounting of the the sport exhaust. Connection to front parts at the manufacturer connection point. Installation/fitting at the serial mounting points. The activation of the valves is carried out using the original actuators via the vehicle onboard electronics. |
| Choose from following tail pipe package: | |
| 0046 70CSR | Carbon tail pipe set 4 Carbon tail pipes Ø 102 mm angled, Titanium internals, with adjustable spherical clamp connection |
| 0046 70SGR | stainless steel tail pipe set 4 tail pipes Ø 102 mm angled, Street Race, straight cut, chromed, with adjustable spherical clamp connection |
| 0046 70SR | stainless steel tail pipe set 4 tail pipes Ø 102 mm angled, chromed, with adjustable spherical clamp connection |
| 0046 98CR | stainless steel tail pipe set 4 tail pipes Ø 98 mm Street Race, with adjustable spherical clamp connection |
| 0046 98CBR | stainless steel tail pipe set 4 tail pipes Ø 98 mm Street Race, Black Chrome, with adjustable spherical clamp connection |
DISCLAIMER
The products of REMUS Innovation GmbH („REMUS“) are distributed worldwide. REMUS and its affiliates shall not assume any obligations, warranties, guarantees or other liabilities for the fact that the products manufactured by REMUS comply with the applicable law of the respective country of destination or may be used without (official) approval. This applies equally to products approved in Austria, which are subsequently manipulated, modified, edited or otherwise interfered or changed by the respective buyer, so that it no longer has its original condition.
The buyer shall be solely responsible for obtaining all whatsoever approvals and permissions required by the respective national law for suchlike products and shall be solely responsible for ensuring that the products manufactured by REMUS comply with the approvals required for the respective usage in the country of destination.
Intended use in Austria:
Products manufactured by REMUS without (EC-)approval are only eligible for usage at motor sport events or tests within the meaning of KFG 1967. They are not intended for vehicles used on public roads. The buyer is solely responsible for obtaining the permissions where applicable required by the applicable law for the intended purposes/usage. In no event a whatsoever claim shall be constituted by the buyer against REMUS and its affiliates arising from or in connection with required approvals for public road usage.
